Filter
Top Products
52
LSQT1337
Shutter Speed:
Adjust it when recording fast-moving subjects.
Aperture:
Adjust it when the screen is too bright or too
dark.
1 Select the manual mode. (l 48)
2 Select [ ] or [ ] with the
joystick.
3 Adjust the settings with the
joystick.
A Shutter speed:
1/30 to 1/8000
1/30 to 1/500
≥ The shutter speed closer to 1/8000 is faster.
≥ If [AUTO SLW SHTR] is set to [OFF], the
slowest shutter speed is 1/60.
B Iris/Gain value:
CLOSE # (F16 to F2.0) # OPEN #
(0dB to 18dB)
≥ Value closer to [CLOSE] darkens the image.
≥ Value closer to [18dB] brightens the image.
≥ When the iris value is adjusted to brighter than
[OPEN], it changes to the gain value.
To restore to automatic adjustment
Press the AUTO button.
≥ When setting both the shutter speed and the
iris/gain value, set the shutter speed and then
set the iris/gain value.
∫ Manual shutter speed adjustment
≥ Avoid recording under fluorescent light,
mercury light or sodium light because the color
and brightness of the playback image may
change.
≥ If you increase the shutter speed manually, the
noise on the screen may increase.
≥ You may see vertical lines of light in the
playback image of a brightly shining subject or
highly reflective subject, but this is not a
malfunction.
≥ During normal playback, image movement
may not look smooth.
≥ When recording in an extremely bright place,
the screen may change color or flicker. If so
adjust the shutter speed manually to [1/60] or
[1/100].
∫ Manual iris/gain adjustment
≥ If the gain value is increased, the noise on the
screen increases.
≥ Depending on the zoom magnification, there
are iris values that are not displayed.
Manual shutter speed/
aperture adjustment
MNL
3/3
3/3
NEXT
NEXT
3/3
NEXT
OPEN
OPEN
1/
100
100
1/100
OPEN
MNL
BACK
BACK
BACK
A
B
SDR-H60&41&40P&PC&PL-LSQT1337_mst.book 52 ページ ２００７年１１月１２日 月曜日 午後１時４６分