72
LSQT1337
With other
products
1
Playback on TV
[HDD] [SD]
The motion pictures and still pictures recorded by this unit can be played back on a TV.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ If you have a TV with an SD card slot, the motion pictures and still pictures recorded on an SD card
may be played back on the TV. (Refer to the operating instructions of the TV for details about TV
compatibility.)
1 Connect this unit and a TV.
2 Turn on this unit, then rotate the
mode dial to select or .
3 Select the playback medium by
the menu. (l 28)
4 Start playback on this unit.
∫ If the image or audio from this unit does
not appear on the TV
≥ Check the connections.
≥ Check that the plugs are inserted as far as they
go.
≥ Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
∫ To watch images with a 16:9
aspect ratio on a regular TV (4:3)
If the images are squeezed horizontally on a TV
with a 4:3 aspect ratio, change the menu setting
to play back the pictures in the original aspect
ratio.
≥ If the images are not displayed correctly on a
wide-screen TV, adjust the aspect setting on
the TV. (Refer to the operating instructions of
the TV for details.)
Select the menu. (l 28)
Example of images with a 16:9 aspect ratio on
a regular TV (4:3)
≥ This function’s default setting is [16:9].
≥ Depending on the TV setting, the pictures may
not be displayed correctly. For more
information, please read the operating
instructions of your TV.
A AV cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Do not use any other AV cables except the
supplied one.
≥ Select the video input on the TV that this
unit is connected to.
[MEDIA SELECT] # [HDD] or
[SD CARD]
VIDEO IN
AUDIO IN
A
1
2
[SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
SDR-H60&41&40P&PC&PL-LSQT1337_mst.book 72 ページ 2007年11月12日 月曜日 午後1時46分