Filter
Top Products
47
LSQT1337
Recording
(Advanced)
2
Recording functions of
menus
[HDD] [SD]
¬Rotate the mode dial to select or .
Guideline function:
≥ The guidelines do not appear on the images
actually recorded.
≥ The guidelines are not displayed while rotating
the LCD monitor frontward to record yourself.
Wind noise reduction function:
≥ The wind noise reduction depends on the wind
strength. (If this function is activated in strong
winds, the stereo effect may be reduced. When
the wind weakens, the stereo effect will be
restored.)
Auto slow shutter mode:
≥ When the auto slow shutter mode is selected,
the slowest shutter speed changes from 1/60
to 1/30.
≥ When the shutter speed becomes 1/30, the
screen display may be seen as if frames are
missed and afterimages may appear.
≥ If the scene is low in brightness or contrast, the
subject may not be focused on.
Menus
Guideline/Aspect ratio/Wind noise reduction/Auto slow shutter
Function Effect/Setting method
Guideline function
You can check if the image is level while recording by using the
guidelines displayed on the screen.
Select the menu. (l 28)
[BASIC] # [GUIDE LINES] # [ON]
≥ To cancel the function, select [OFF].
Aspect ratio
(Only when the mode
dial is set to
.)
This allows you to record images compatible with wide-screen TVs
(16:9) and regular TVs (4:3).
Select the menu. (l 28)
[BASIC] # [ASPECT] # [16:9] or [4:3]
≥ The default setting is [16:9].
Wind noise
reduction function
(Only when the mode
dial is set to
.)
This reduces the winding noise picked up by the microphone.
Select the menu. (l 28)
[ADVANCED] # [WIND CUT] # [ON]
≥ The default setting is [ON].
≥ To cancel the function, select [OFF].
Auto slow shutter
mode
You can record bright pictures even in dark places by slowing the
shutter speed.
Select the menu. (l 28)
[ADVANCED] # [AUTO SLW SHTR] # [ON]
≥ The default setting is [ON].
≥ To cancel the function, select [OFF].
SDR-H60&41&40P&PC&PL-LSQT1337_mst.book 47 ページ ２００７年１１月１２日 月曜日 午後１時４６分