- 116 -
Recording
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
• The exposure meter is displayed, and the aperture and shutter speed are changed to give a
suitable exposure. Which items of the settings change will depend on the Recording Mode.
• In the following cases, suitable exposure cannot be set. (Exposure meter is displayed)
– When the subject is extremely dark and it is not possible to achieve adequate exposure by
changing the aperture value or shutter speed
– When recording using the flash
– In Preview Mode (P115)
– When using a lens that includes an aperture ring
Note
•
In Program AE Mode, you can cancel program shift by pressing function button.
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when the shutter
button is pressed halfway.
• If the Manual Exposure Assistance is anything other than when
in Manual Exposure mode. For more details on Manual Exposure
Assistance, refer to P119.
1 Set the [Fn Button Set] of the [Custom] menu to [One Push AE].
•
This is the procedure for setting [Fn1].
2 (When exposure is not adequate) Press [Fn1].
Recording
Mode
Settings that change
Aperture value
Shutter speed
Aperture value/Shutter speed
1
6
4000
4000
40003.5
3.5
3.5
00
-
3
-
3
A
16
0
SSSSSS
F
15 250
4.0 5.6 8.0
1256030
6060603.5
0
16
0
4000400040003.53.53.5
00
-
3
-
3