Panasonic VQT4H13 Digital Camera User Manual


 
- 89 -
Recording
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
Pictures taken with a burst speed of [SH] will be recorded as a single burst group (P173).
1
Press 4 ().
2
Touch burst icon ([ ], etc.).
3
Touch the burst speed.
¢1 Number of recordable pictures
¢2 Depending on the recording conditions, the number of frames in a burst may be reduced. (For
example, when [i.Resolution] of the recording menu is set to [EXTENDED], the number of frames
in a burst may be reduced)
¢3 Pictures can be taken until the capacity of the card becomes full. However the burst speed will
become slower halfway. The exact timing of this depends on the aspect ratio, the picture size, the
setting for the quality and the type of card used.
The Burst Mode speed may become slower depending on the following settings.
[Picture Size] (P149)/[Quality] (P150)/[Sensitivity] (P111)/[Focus Mode] (P36)/[Focus Priority]
(P167)
Burst speed can also be set with [Burst Rate] in the [Rec] menu.
Refer to P150 for information about RAW files.
[SH]
(Super high
speed)
[H]
(High speed)
[M]
(Middle speed)
[L]
(Low speed)
Burst speed
(pictures/second)
20 6 3.7 2
Live View during Burst Mode None None Available Available
¢1
With RAW files
9
¢2, 3
Without RAW files Max. 40
Depends on the capacity of the card
¢3
10
31/3
SH
HH
H
M
LV
L
LV
6HW
10
31/3
SH
H
HH
M
LV
L
LV
6HW