Filter
Top Products
- 17 -
Preparation
Changing the Lens
• Check that the camera is turned off.
• Change lenses where there is not a lot of dirt or dust. Refer to P213, P214 when dirt or dust gets on
the lens.
1
Turn the lens rear cap A and the body cap B in the direction of the arrow
to detach them.
• Do not put your hands inside the mount.
2
Align the lens fitting marks C (red marks) on
the camera body and the lens and then rotate
the lens in the direction of the arrow until it
clicks.
• Do not press the lens release button D when you attach
a lens.
• Do not try to attach the lens when holding it at an angle
to the camera body as the lens mount may get
scratched.
3
Detach the lens cap.
Attaching the lens