Filter
Top Products
- 26 -
Preparation
Inserting and Removing the Card (optional)/
the Battery
• Check that this unit is turned off.
• We recommend using a Panasonic card.
1
Slide the release lever in the direction of the
arrow and open the card/battery door.
• Always use genuine Panasonic batteries.
• If you use other batteries, we cannot guarantee the
quality of this product.
2
Battery: Being careful about the battery
orientation, insert all the way until you hear
a locking sound and then check that it is
locked by lever A.
Pull the lever A in the direction of the arrow
to remove the battery.
Card: Push it securely all the way until you
hear a “click” while being careful about the
direction in which you insert it.
To remove the card, push the card until it clicks, then pull the card out
upright.
B:Do not touch the connection terminals of the card.
3
1: Close the card/battery door.
2: Slide the release lever in the direction of
the arrow.
Note
•
Remove the battery after use. (The battery will be exhausted if left for a long period of time after
being charged.)
• The battery becomes warm after using it and during and after charging. The camera also becomes
warm during use. This is not a malfunction.
• Before removing the card or battery, turn the camera off, and wait until the status indicator has gone
off completely. (Otherwise, this unit may no longer operate normally and the card itself may be
damaged or the recorded pictures may be lost.)