Filter
Top Products
6 C2443M-C (1/04)
HOW TO OPERATE YOUR DOME SYSTEM
Operation How to Control
Pan and Tilt Move joystick or press the direction keys left/right and up/down.
Zoom Far To zoom far, do the following:
1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit.
2. Release the button or joystick for one second.
3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the
picture you want or reach the digital zoom
1
limit.
Zoom Wide Press the Zoom Wide button or turn the joystick counterclockwise.
Scanning
Stop Scan Preset 96
Random Scan Preset 97
Frame Scan Preset 98
Auto Scan Preset 99
Presets Refer to the documentation supplied with the control system.
Patterns
2
Refer to the documentation supplied with the control system.
Zones Refer to the
Zones
section and to the documentation supplied with the control system.
Alarms Refer to the
Alarms
section in this manual.
Auto Flip Turn on or off in the programming menu. Refer to the
Auto Flip
section in this manual.
1
Digital zoom magnifies the image electronically and the picture may appear pixilated. The larger the digital zoom limit the
greater the reduction in resolution.
2
The dome cannot do electronic zoom in a pattern. Optical zoom will operate in a pattern.