Filter
Top Products
40 C311M-O (11/07)
IMAGE STABILIZER
(Applies only to 35X models.)
Image stabilization is a feature of the camera that can compensate for some forms of external influences. In all cases, care should be taken to
make sure that any Esprit system is mounted to a rigid location.
The image stabilization feature will not correct for all ranges of vibration. If the available settings fail to eliminate the vibration seen in the video,
other measures should be taken to isolate the vibration or to seek a more rigid mounting location.
NOTE: Digital zoom is limited when image stabilization is activated.
There are three settings for image stabilization:
• 5 Hz: This setting corrects for vibrations at the 5 Hz frequency.
• 10 Hz: This setting corrects for vibrations at the 10 Hz frequency.
• Off: The setting is disabled.
NOTE: Apply each of the settings to the camera to see which one best addresses the vibration that is affecting the video quality.
To change the image stabilizer setting:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Camera.
3. Press the Iris Open button to enter the Camera menu.
4. Position the cursor (>) beside Next.
5. Press the Iris Open button to enter the Next menu.
6. Position the cursor (>) beside Img Stabilizer.
7. Press the Iris Open button. The cursor moves to the right, beside the current image stabilizer setting.
8. Move the joystick up or down to change the setting.
9. Press one of the following buttons on your keyboard:
• Iris Open: Press the Iris Open button to select your choice.
• Iris Close: Press the Iris Close button if you do not want to change the setting.
Backlight comp Off
Zoom limit x- -
Reset camera
<Gain/AGC>
<Auto iris>
Next
Exit
<Type of Lighting>
Camera Menu
<Camera>
<Line Sync>
<Power Up>
<Wiper>
<Limit Stop>
<Alert>
<Other>
ACK Alert
Exit
MAIN MENU
LowLight limit
Shutter speed Auto
Auto focus mode Auto
LowLight focus Def
Img Stabilizer Off
<Sharpness>
<IR filter>
<White balance>
Prev
Exit
Next Menu