Filter
Top Products
C311M-O (11/07) 49
PATTERN LENGTH
The Esprit can do the following:
• One full pattern that is 1.5, 3, or 6 minutes long.
• Two half patterns that are 0.75, 1.5, or 3 minutes long.
This pattern can consist of any standard pan/tilt or lens command. Presets, flip, and Turbo are not allowed in a pattern. Zone scan can be enabled
while running a pattern.
NOTE: Digital zoom and proportional pan are not available during a pattern.
To set the pattern length:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Other.
3. Press the Iris Open button to enter the menu entitled Other.
4. Position the cursor (>) beside Pattern Length.
5. Press the Iris Open button. The cursor moves to the right, beside the number of minutes (1.5, 3, or 6).
6. Move the joystick up or down to toggle through the number of minutes (1.5, 3, or 6).
7. Press one of the following buttons on your keyboard:
• Iris Open: Press the Iris Open button to select your choice.
• Iris Close: Press the Iris Close button if you do not want to change the setting.
WARNING: If the pattern length is changed, all patterns that were stored are erased.
Proportional pan On
Park time minutes 0
Scan Speed deg/s 25
Pattern Length 1.5 min
Spd Profile 90 MPH wind
Exit
Other Menu
MAIN MENU
<Camera>
<Line Sync>
<Power Up Mode>
<Wiper>
<Limit Stops>
<Text Display>
<Alert>
<Other>
ACK Alert
Exit