Pentax 12761 Digital Camera User Manual


 
109
3
Taking Pictures
3
Use the four-way controller (4 5)
to choose a movie mode.
When an icon is selected in the Movie
Mode Palette, the guide for the selected
movie mode appears.
4
Press the 4 button.
The movie mode is selected, and the camera is ready for recording
movies.
The selected movie mode is saved and retrieved when the mode dial
is set to C.
You can turn the guide display off for each mode on the Movie Mode
Palette (p.178).
Cautions for c (Time-Lapse Movie), C (Movie) and d (High Speed
Movie) in common
The flash cannot be used.
Select the focus mode before recording starts. The focus mode cannot
be changed during recording.
The focus can be adjusted manually before recording starts if the focus
mode is set to \. The focus cannot be adjusted during recording.
The monitor display cannot be switched using the 3 button during
movie recording.
When the mode dial is set to C, the Face Detection function is
automatically set to [On]. If you want to set it to [Smile] or [Off], change
the setting in the [A Rec. Mode] menu before movie recording starts
(p.100).
When the Face Detection function is set to [Smile] and the focus mode
is set to = or q, movie recording starts automatically when the
camera detects the subject’s smile. However, depending on the
condition of the detected faces, movie recording may not start
automatically, because the Smile Capture function may not work. If
this happens, press the shutter release button to start recording a
movie.
For recording movies
Movie
Movie
OK
OK
OK
MENU
Cancel
Cancel
Movie Mode Palette