Filter
Top Products
202
8
Appendix
Data being recorded
Displayed when you switch to Q mode while an image is
still being recorded, or when the protect setting or DPOF
setting is being saved. It disappears after the image is
recorded or the setting is saved.
Data being processed
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Built-in memory full Displayed if the built-in memory is full when saving a file.
No image to be
processed
Displayed when there are no images.
This image cannot be
processed
Displayed for files that cannot be processed.
No card in the camera Displayed when no SD Memory Card is inserted.
Available memory on
card is insufficient to
copy the images
Displayed when there is insufficient memory on the SD
Memory Card to perform copying.
Available built-in
memory is insufficient to
copy the images
Displayed when there is insufficient built-in memory to
perform copying.
Cannot process
correctly
Displayed when Red-eye Edit processing fails.
Please pop-up the flash Press the b button to enable the use of the flash.
Please confirm the lens
cap is removed
Displayed when the power is turned on with the lens cap on.
Turn the camera on after removing the lens cap.
Not enough battery
power remaining to
activate Pixel Mapping
Displayed during pixel mapping if the battery level is
insufficient. Install new batteries or use the optional AC
adapter kit K-AC129 (p.32).
This card isn’t
compatible with this
camera
Displayed when the version of the Eye-Fi card is outdated
and the camera is not compatible with it (p.194).
The version of this Eye-
Fi card is outdated
Message
Description