Filter
Top Products
177
6
Settings
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1
Use the four-way controller (23) to select [Auto Power
Off] in the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the time
until the camera turns off automatically.
Choose from [5min.], [3min.] or [Off].
4
Press the 4 button.
The setting is saved.
• Power Saving does not function in the following situations:
- While taking pictures in j (Continuous Shooting), A (Burst
Shooting(L)) or C (Burst Shooting(H)) mode
- When the AC adapter is connected
- In playback mode
- While recording a movie
- While the camera is connected to a computer
- When a menu is being displayed
• When no operation is performed after the camera is turned on, the
Power Saving function is activated only after 15 seconds elapse even
if [5sec.] is set.
Setting the Auto Power Off Function
Auto Power Off does not function in the following situations:
- While taking pictures in j (Continuous Shooting), A (Burst
Shooting(L)) or C (Burst Shooting(H)) mode
- While recording a movie
- During a slideshow or playback of movies
- While the camera is connected to a computer
- While images are being transferred using an Eye-Fi card