Filter
Top Products
59
3
Taking Pictures
5
Press the shutter release button
halfway.
The selected shooting mode is displayed on
the top left of the screen.
The focus frame (or face detection frame) on the display turns green
when the camera focuses on the subject at the correct distance.
To use the flash, press the b button to pop up the flash (p.84).
6
Press the shutter release button fully.
The picture is taken.
The flash discharges automatically depending on the light conditions.
The captured image appears on the display (Instant Review: p.60) and
is saved to the SD Memory Card or the built-in memory.
The shutter release button works in a two-step action as follows.
Standard Night Scene Night Scene Portrait
Landscape Flower Portrait
Sport Candlelight Blue Sky
Portrait×Blue Sky
Portrait×Backlight
Sunset
Portrait×Sunset
Group Photograph
Text
The following restrictions apply in b mode:
- You cannot set the Face Detection function to [Off].
- The focusing area setting is fixed at J (Multiple).
- The b (Flower) mode cannot be selected when using Digital Zoom
or Intelligent Zoom.
- The flash mode is fixed to a when A (Night Scene) mode is
selected.
- When the drive mode is set to A (Burst Shooting(L)), or
C (Burst
Shooting(H)), pictures are taken consecutively in shooting mode
selected for the first shot.
To Use the Shutter Release Button
F4.6
F4.6
1/250
1/250
F4.6
1/250
14:25
14:25
14:25
38
38
38
09/09/2012
09/09/2012
09/09/2012