Filter
Top Products
180
6
Settings
4
Press the 4 button.
The start-up screen is set.
Pixel Mapping is a function for mapping out and correcting defective
pixels in the image sensor. Run the Pixel Mapping function if image dots
always seem to be defective in the same place.
1
Press the 3 button in A mode, and press the four-
way controller (5) twice.
The [W Setting] menu appears.
2
Use the four-way controller (23) to select [Pixel
Mapping].
3
Press the four-way controller (5).
The [Pixel Mapping] screen appears.
• Once the start-up screen has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card/built-in memory is
formatted.
• The start-up screen is not displayed when set to [Off].
• The start-up screen is not displayed when the camera starts up in
playback mode.
• The following images cannot be used as the start-up screen: images
taken with the recorded pixels of o/n/0/1/h,
images of smaller size than h with 4:3 aspect ratio, images taken at
F (Digital Panorama) mode, and movies.
Correcting Defective Pixels in the Image Sensor
(Pixel Mapping)
When executing Pixel Mapping, display the [W Setting] menu in A
mode. Pixel Mapping cannot be selected when the [W Setting] menu is
displayed in Q mode.