Filter
Top Products
63
3
Taking Pictures
1
Press the Green button in A
mode.
The camera switches to 9 mode.
Press the Green button again to return to
the status before 9 mode was selected.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.61).
To use the flash, press the b button to pop up the flash (p.84).
2
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
3
Press the shutter release button fully.
The picture is taken.
• The 9 mode is available only when it is assigned to the Green button
in [Green Button] of the [A Rec. Mode] menu (p.105). By default, the
9 mode is assigned to the Green button.
•In 9 mode, you cannot change the information on the display by
pressing the 3 button.
• If you press the 3 button in 9 mode, the [W Setting] menu
appears. The [A Rec. Mode] menu cannot be displayed.
• When the camera is turned off in 9 mode, it turns on in 9 mode next
time the power button is pressed.
Green button
Shutter release
button
38
38
38