Filter
Top Products
INSTALLING THE EYECUP
27
BASIC OPERATION (PREPARATION)
123
Two types of eyecups, a standard and a larger are
provided as accessories; they may be utilized
according to a given situation. The larger is con-
structed of rubber and designed to fit close to the
face for easy shooting.
To install
1. The standard eyecup may be easily removed
from the viewfinder by rotating the cup to the
left.
2. To install the larger eyecup: match the eyecup
pin with fitting eyepiece hole.
3. Turn the fixing screw by turning to the right
with a coin or similar object.
• When using accessories such as the Refconverter
645, remove the eyecup first.
• When turning the fixing screw with a coin, a large
diameter coin is recommended to use. A small
diameter coin touches the glass part of the eye-
piece and causes scratching the eyepiece glass.