Filter
Top Products
65
Imprinted description
Characters
Number of films
Number of frames
Exposure mode
Shutter speed
Aperture setting
Exposure compensation value
Auto bracketing
Metering mode
AE lock
Flash status
Focal length of lens
Focus mode
Autofocus mode
AF area
Focus point
Film speed
Capital letter [A to G] is imprinted to identify the camera.
[ 1 - 199 ] can be imprinted. Beyond 199, it returns to 1.
[ 1 – 99 ] can be imprinted.
[ M ] (Metered Manual), [ Tv ] (Shutter-priority AE), [ Av ] (Aperture-priority AE) or [ P ]
(Programmed AE) can be imprinted.
[ The shutter speed ] displayed in the viewfinder is imprinted. For bulb exposure, up to [ 9999 ]
seconds can be imprinted. Beyond 9999 seconds, [ BULB ] will be imprinted. [ LS ] for lens shut-
ter is used, [ X ] for when the shutter speed dial is set to the X position.
[ Aperture value ] displayed in the viewfinder is imprinted. When the 67 lens adapter or the 645
Helicoid Extension Tube having no lens information contacts are used, [ F - - ] will be imprinted.
When the exposure compensation is not enabled, [ ±0.0Ev ] is imprinted. The exposure com-
pensation value for the auto bracketing is also imprinted. If both auto bracketing and exposure
compensation are used, the sum is imprinted.
[ AEB ] is imprinted when the pictures are taken in auto bracketing mode.
(Multi-segment ), (Center-weighted), (Spot)
[AE-L] is imprinted with the AE-lock function used.
[ ] is imprinted when a Pentax dedicated flash is fired.
[ Focal length ] is imprinted when the FAlens is attached. When the FAzoom lens is in use, [an
approximate value of focal length] is imprinted. [ - - mm ] is imprinted when the A-lens, rear con-
verter or etc. is mounted.
[ AF ] is imprinted with the autofocus mode used. [ MF ] is imprinted with the manual focus mode
used.
[ S ] is imprinted with Single AF mode used. [ C ] is imprinted with Continuous AF mode used.
[ WIDE ] is imprinted with the 3-point AF mode used. [ SPOT ] is imprinted with the spot AF mode
used.
With the 3-point AF is set, which focus point is used imprinted with L (left), R (right), or C (cen-
ter).
Set the film speed ISO 6 to 6400 is imprinted.
ADVANCED OPERATIONS
Data type