Filter
Top Products
54
1. Set the auto bracketing selector to the desired
exposure compensation value.
2. Press the shutter release button fully. Three pic-
tures are taken consecutively according to the
auto-bracketing switch you have set.
• Three pictures are taken consecutively as follows.
First picture: Correct exposure
Second picture: Underexposure
Third picture: Overexposure
• The sequence of the auto bracketing exposures can be
changed with Pentax Function No. 3.
• The camera automatically measures the exposure for
each shot.
• The focus is locked at the first picture and remains
locked until all pictures are taken.
• If you let go of the shutter release button during auto
bracketing, the auto bracketing will remain effective until
the viewfinder indication goes off. After that, auto brack-
eting exposure for the first bracketed frame will take
effect.
Auto Bracketing Exposure Mode combined with the
Exposure Compensation function.
You can combine the auto bracketing exposure mode with
exposure compensation function.
The auto bracketing will take effect to the set-exposure
compensation amount.
Auto Bracketing Exposure Mode combined with the
Metered Manual Mode.
You can combine the auto bracketing exposure mode with
the metered manual mode (except X sync speed).
The auto bracketing will take effect only to the set-shutter
speed. The bar graph of the metered manual mode is only
displayed in the viewfinder. The bar graph of the exposure
compensation value is not displayed.
ADVANCED OPERATIONS
1
––
3
EV
2
––
3
EV 1EV
1EV
1
––
2
EV
3
––
2
EV
with 1/3EV set with 1/2EV set