Pentax 645N2 Film Camera User Manual


 
45
ADVANCED OPERATIONS
34*
3. Set the desired f-stop.
4. The f-stop that you have selected and appro-
priate aperture indication determined by the
camera can be seen in the viewfinder when
the shutter release button is depressed
halfway.
The approximate aperture indication appears in
the viewfinder. It may not the same indication as
you select the lens aperture ring especially when
the A645 150mm f/3.5 or A 645 45-85mm Zoom
f/4.5 is attached.
* Exposure Warning
If the subject is too bright or too dark, the selected
shutter speed will blink in the viewfinder and on the
LCD panel as a warning as shown. When the sub-
ject is too bright, choose a smaller aperture, if avail-
able; when it is too dark, choose a larger aperture,
if available. When the shutter speed indication
stops blinking, you can take the picture. If both
shutter and aperture blink, it means that the expo-
sure is out of metering range, unable to obtain a
correct exposure even if the aperture is adjusted.
Select a darker subject if it is too bright, or use a
flash if it is too dark.
2216
84
2216
84
ft
m
10
15
A22
16 11 8
5.6 2.8