Filter
Top Products
MIRROR LOCK-UP
75
This camera is equipped with a mirror lock-up facility.
To set
1. Set the drive mode selector to [ M. UP ].
2. Press the shutter release button fully to swing up
the mirror.
3. Press the shutter release button again. The shutter
is released.
• The exposure is locked just before the mirror goes up.
• The audible PCV signal’s beeping can be enabled and
will be heard with the drive mode selector set at [ ].
To cancel
1. With the exposure mode set to the Aperture-Priority
AE mode, Metered manual mode or Bulb exposure
mode:
qSet the Drive mode selector to a position other than [ M.
UP ] or set the main switch to [ OFF ].
2. With the exposure mode set to the Programmed AE
or Shutter-Priority AE mode:
qSet the multi-exposure switch to the ON position.
wSet the drive mode selector to a position other than [ M.
UP ] or set the main switch to [ OFF ].
eSet the multi-exposure switch to the original position.
Note:
Without setting the multi-exposure switch to the ON posi-
tion, the film is advanced by 1 frame when the mirror
returns to the original position.
ADVANCED OPERATIONS
To set To cancel 2
w
w
q
e
To cancel 1
q
q