Filter
Top Products
FOCUS LOCK FUNCTION
60
ADVANCED OPERATIONS
132
In the Spot Metering Mode, the camera focuses with the
spot metering / focusing area of the viewfinder. If you
shoot without positioning the spot metering / focusing area
on the main subject, the main subject will not be focused
properly.
Set the AF frame selector to [ ].
1. When the composition does not allow the autofo-
cus frame to be placed over the most important
subject, the camera will focus on the background
as shown in the illustration.
• The focus lock can be used in the 3-point AF Mode and
Spot AF Mode.
• The focus lock does not operate when the AF mode
selector is at [ C ].
2. To prevent this, focus on the main subject with the
spot metering / focusing area. Depress and hold the
shutter release button halfway down. The in-focus
indicator remains on, indicating that the focus is
temporarily locked.
3. While holding the shutter release button halfway
down, re-aim the camera or recompose the picture,
then depress the shutter release button fully to
release the shutter.
• Lifting your finger off the shutter release button clears
the in-focus indicator [ ] in the viewfinder and cancels
the focus lock function.
• To refocus on another subject, lift your finger off the shut-
ter release button.