Pentax K-5 Digital Camera User Manual


 
142
Shooting Functions
4
The Shake Reduction function operates by obtaining the lens information
such as focal length.
If the camera uses a DA, DA L, D FA, FA J, FA or F lens, the lens information
is automatically obtained when the Shake Reduction function is activated.
If you use a lens whose information such as focal length cannot be
automatically obtained (p.337), the [Input Focal Length] setting screen
appears when the camera is turned on with the Shake Reduction function
set to k (On).
Set the focal length manually in the [Input Focal Length] setting screen.
1
Use the four-way controller
(45) or the rear e-dial (S) to
set the focal length.
Select from the following 34 focal length
values. (The default setting is 35 mm.)
2
Press the 4 button.
The camera is ready to take a picture.
When the Focal Length Cannot Be Automatically Detected
The [Input Focal Length] setting screen does not appear when using a lens
whose information such as focal length can be automatically obtained.
When using a lens without the s position on the aperture or with the aperture
set to a position other than s, set [27. Using Aperture Ring] in the [A Custom
Setting 4] menu to [Permitted]. (p.339)
The effect of Shake Reduction is influenced by the shooting distance as well
as focal length information. The Shake Reduction function may not work as
effectively as expected when shooting at close ranges.
8 101215182024283035
40 45 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800
If the focal length for your lens is not listed above, select the value closest to
the actual focal length (example: [18] for 17 mm and [100] for 105 mm).
When using a zoom lens, select the actual focal length at the zoom setting
being used in the same manner.
Cancel OK
OK
MENU
Input Focal Length
135
120
100