Filter
Top Products
191
5
Using the Flash
Set the camera to wireless flash mode when using an external flash in
combination with the built-in flash.
1
Press the four-way controller (3).
The [Flash Mode] screen appears.
2
Select r and press the 4
button.
The camera is ready to take a picture.
The channel for the built-in flash is
displayed in the viewfinder and on the
LCD panel. The factory default setting is
CH1.
Using the Built-in Flash in Wireless Mode
• r cannot be set when the exposure mode is set to B (Green).
• When the drive mode is set to i (Remote Control (3s delay)), d (Mirror
Lock-up) or e (Mirror Lock-up remote control), or the lens aperture is not
set to the s position, r cannot be selected.
Flash Mode
Wireless Mode
Cancel OK
OK
MENU
0.0
Changing the Built-in Flash Discharge Method
You can change the built-in flash discharge method used in wireless
mode.
Set in [21. Flash in Wireless Mode] of the [A Custom Setting 3] menu
(p.92).
1On
Discharges the built-in flash as a master. (default
setting)
2 Off Discharges the built-in flash as a control flash.
HSb (High-speed flash sync) is not available with the built-in flash.