Filter
Top Products
169
Shooting Functions
4
* Indicator 9 is displayed when switching to Live View after adjusting the
composition in [Composition Adjust.] (p.220) in the [
A
Rec. Mode 2] menu.
* Indicator 11 is displayed when [Electronic Level] is set to O (On) (p.299).
When the Electronic Level function is assigned to the |/Y button
(p.285), press the |/Y button to switch the display on/off.
* Indicator 13 (Phase Difference AF frame) is displayed in white during Live
View. When the subject is in focus, a green square frame is displayed
instead. It turns red when the subject is not in focus. It is not displayed
when the focus mode is set to \.
* When 17, 18, and 20 can be changed, 5 appears next to the set value.
* Indicators 22 and 23 are displayed when [Autofocus Method] is set to I
and the camera detects person’s face(s). (Up to 16 face recognition
frames are displayed on the monitor.) When the subject is in focus, a
green frame is displayed. It turns red when the subject is not in focus.
Available operations
*1 Available only when [Autofocus Method] is I or i, and the focus mode is l
or the AF point switching dial is set to j (Select).
3
Position the subject on the monitor and press the shutter
release button halfway.
The autofocus system operates.
When the focus mode is set to \, turn the focusing ring until the subject
is clearly visible on the focusing screen.
18 Aperture value 22 Main face detection frame
(Face Detection AF)
19 EV bar
20 Sensitivity 23 Face detection frame (Face
Detection AF)
21
Remaining image storage capacity
M button Enlarges the image.
2, 4, or 6 times original size (when the focus mode is
=)
2, 4, 6, 8 or 10 times original size (when the focus
mode is \)
| button Returns the position of the display area to the center
(during enlarged view).
Press and hold 4
button *1
Switches the function of the four-way controller
(2345) to Change AF point or direct key operation.
4 button *1 Returns the position of the AF point to the center
(when Change AF point is enabled).
Four-way controller
(2345)
Changes the AF point (when Change AF point is
enabled).
Moves the display area (during enlarged view).