Filter
Top Products
148
Shooting Functions
4
• By default, you cannot adjust the focus with the remote control unit. Focus on
the subject first with the camera before operating with the remote control.
When [18. AF with Remote Control] is set to [On] in the [A Custom Setting 3]
menu (p.92), you can use the remote control unit to adjust the focus. (AF
cannot be used with the remote control unit during Live View.)
• When using the Remote Control Waterproof O-RC1, AF can be operated with
the S button. The { button cannot be used.
• Select a mode other than h, i or i in the [Drive Mode] screen to cancel
the Remote Control shooting. The setting is canceled when the camera is
turned off if [Drive Mode] is set to P (Off) in [Memory] (p.312) of the [A Rec.
Mode 5] menu.
• The Shake Reduction function is automatically turned off when h, i or i
is set.
• The exposure may be affected if light enters the viewfinder. Use the AE Lock
function (p.121) or attach the provided ME viewfinder cap. The light entering
the viewfinder has no effect on the exposure when the exposure mode is set
to a (Manual).
• The remote control may not operate in backlit conditions.
• The Remote Control F can send a remote control signal about 30,000 times.
Contact a PENTAX Service Center to replace the battery (this will involve a
fee).
Removing the Eyecup FR Attaching the
ME Viewfinder cap