Pentax K-5 Digital Camera User Manual


 
175
Shooting Functions
4
*1 Available only when [Autofocus Method] is I or i, and the focus mode is l
or the AF point switching dial is set to j (Select).
2
Position the subject on the monitor and press the shutter
release button halfway.
The autofocus system operates.
When the focus mode is set to \, turn the focusing ring until the subject
is clearly visible on the focusing screen.
3
Press the shutter release button fully.
Recording of the movie starts.
4
Press the shutter release button again.
Recording stops.
Four-way controller
(2345)
Changes the AF point (when Change AF point is
enabled).
Moves the display area (during enlarged view).
When [Sound] is set to g (On), the camera operation sounds are also
recorded. When recording a movie, mount the camera onto a tripod and do
not operate the camera while recording.
While recording a movie, the autofocus system does not operate.
The flash is not available.
When recording movies using image processing, such as Digital Filter, some
frames may be dropped from the recorded movie.
If the internal temperature of the camera becomes high during movie
recording, the recording may be terminated to protect the camera circuitry.