352
Appendix
11
Battery depleted
The battery is exhausted. Install a fully charged
battery in the camera. (p.49)
Not enough battery
power remaining to
clean sensor
Appears during sensor cleaning if the battery
level is insufficient. Install a fully charged
battery or use an AC adaptor kit K-AC50
(optional). (p.53)
Not enough battery
power remaining to
activate Pixel Mapping
Appears during pixel mapping if the battery
level is insufficient. Install a fully charged
battery or use an AC adaptor kit K-AC50
(optional). (p.53)
Image folder cannot be created
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.281)
Unable to store image
The image could not be saved because of an
SD Memory Card error.
Settings not stored
The DPOF settings could not be saved because
SD Memory Card is full. Delete unwanted
images and perform DPOF setting again. (p.84)
The operation could not be
completed correctly
The camera was unable to measure the manual
white balance or detect dust on the sensor. Try
the operation again. (p.208, p.341)
No more images can be
selected
You cannot select 100 or more images at a time
for Index (p.243) and Select & Delete (p.250).
No image can be processed
There are no images that can be processed
using Digital Filter (p.265) or RAW
Development (p.271) function.
This image cannot be
processed
Appears when you try to perform Save as
Manual WB (p.213), Resize (p.262), Cropping
(p.263), Digital Filter (p.265), or RAW
Development (p.271) for images captured with
other cameras, or when you try to perform
Resize or Cropping for minimum file size
images.
The camera failed to create
an image
The creation of an index print image failed.
(p.243)
Camera overheated.
Disabling Live View temporarily
to protect circuitry
Live View cannot be used because the
camera’s internal temperature is too high.
Press the 4 button and try using Live View
again when the camera has cooled down.
Error message Description