Filter
Top Products
238
Processing Images
8
Readjusting Images Shot in JPEG
Format
You can readjust Custom Image and White Balance for the image shot in
JPEG format immediately after shooting it without deteriorating image
quality.
1
Set the file format to [JPEG] and shoot an image.
Refer to p.177 for setting File Format.
2
Press the four-way controller (4) to change White
Balance, or press the four-way controller (5) to change
Custom Image.
The [White Balance] or [Custom Image] screen appears.
3
Set White Balance or Custom Image as desired.
Custom Image or White Balance can be set using the same procedures
as before shooting.
Refer to p.182 for setting White Balance and p.194 for setting Custom
Image.
4
Press the M button.
The save confirmation screen appears.
5
Use the four-way controller (23) to select [Save as] and
press the 4 button.
The image with the White Balance or Custom Image setting is saved as
a new image.
The image can be readjusted only right after being shot. Adjustments cannot
be made after new images are shot or the camera is turned off.