Filter
Top Products
294
Appendix
11
Not enough battery
power remaining
to clean sensor
Appears during sensor cleaning if the battery
level is insufficient. Replace the batteries with
new ones or use the AC adaptor kit K-AC84
(optional). (p.42)
Not enough battery
power remaining to
activate Pixel Mapping
Appears during Pixel Mapping if the battery
level is insufficient. Replace the batteries with
new ones or use the AC adaptor kit K-AC84
(optional). (p.42)
Image folder cannot be
created
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved. Insert a new SD Memory
Card or format the card. (p.242)
Unable to store image
The image could not be saved because of an
SD Memory Card error.
Settings not stored
The DPOF settings could not be saved because
SD Memory Card is full. Delete unwanted
images and perform DPOF settings again.
(p.75)
The operation could not be
completed correctly
The camera was unable to measure the manual
white balance or detect dust on the sensor. Try
the operation again. (p.184, p.286)
No more images can be
selected
You cannot select 100 or more images at a time
for Index (p.207) and Select & Delete (p.215).
This RAW file cannot be
developed
RAW files captured with other cameras cannot
be edited on this camera.
This image cannot be
processed
Appears when Resize (p.224), Cropping
(p.225), Digital Filter (p.227), or RAW
Development (p.233) is started for images
captured with other cameras, or when Resize or
Cropping is started for minimum size images.
The camera failed to create
an image
The creation of an index print image failed.
(p.207)
Camera overheated.
Disabling Live View temporarily
to protect circuitry
Live View cannot be used because the
camera’s internal temperature is too high.
Press the 4 button and try using Live View
again when the camera has cooled down.
This function is not available
in the current mode
You are trying to set a function that is not
available in Picture mode, H (Scene) mode or
C (Movie) mode.
Error Message Description