Pentax Optio 43WR Digital Camera User Manual


 
26
2
Quick Start
Quick Start
Taking Still Pictures
This is the simplest way to take still pictures. The flash discharges
automatically based on light conditions by the default setting.
1 Press the power switch.
The camera will turn on.
2 Confirm the subject and shooting
information on the LCD monitor.
The focus frame at the center of the LCD
screen indicates the zone of automatic
focusing. Press the Zoom button to change
the size of the subject.
x Subject becomes bigger.
w Subject becomes smaller.
You can check the size of the subject by looking through the
viewfinder.
3 Lightly Press (Halfway) the Shutter Release Button.
When the subject is in focus, the LCD monitor’s focus frame turns
green.
4 Press the shutter release button down fully.
The image will be displayed on the LCD monitor for 1.5 seconds
(Instant Review) and recorded on the SD Memory Card. (The green
and red lamps next to the viewfinder blink alternately while the image
is being recorded on the SD Memory Card.)
Power switch
Zoom/f/y button
Shutter release button
LCD monitor
AF status lamp (green)
Flash status lamp (red)
100
4/10/2004
4/10/2004
4/10/2004
11:20
11:20
11:20
Focus frame
00_Optio43WR-E.book Page 26 Wednesday, February 25, 2004 1:23 PM