Filter
Top Products
39
4
Taking Pictures
1 Press the b button in Capture mode.
This will switch Flash modes, and the current icon will be displayed on
the LCD monitor.
The camera is ready to take a picture in the selected Flash mode.
Selecting the Flash Mode
(No icon) Auto
The flash discharges automatically based on light
conditions.
a
Flash Off
The flash never discharges regardless of light
conditions.
b
Flash On
The flash always discharges regardless of light
conditions.
c
Auto flash + red-eye
reduction
Reduces red-eye in the picture, caused by the flash
reflecting from the subject’s eyes. The flash
discharges automatically.
d
Flash On + red-eye
reduction
Reduces red-eye in the picture, caused by the flash
reflecting from the subject’s eyes.
The flash discharges regardless of lighting conditions.
• The flash is always off when the Capture mode is set to C, Continuous
shooting, Infinity-Landscape, or Fireworks.
• When using the flash, it always discharges once before taking the
picture, to assist with metering.
• In [Auto flash + Red-eye Reduction] and [Flash On + Red-eye
Reduction] modes, the flash discharges once to make the pupils of the
subjects eyes smaller shortly before the main flash discharges to take
the picture.
• The shutter speed will be slower with the flash off, or in low light
conditions such as a night scene. Use a tripod to prevent camera
movement.
Status of the Flash Status Lamp 1p.27
Saving the Flash Mode 1p.68
b button
00_Optio43WR-E.book Page 39 Wednesday, February 25, 2004 1:23 PM