Filter
Top Products
50 51
IP100 Manual
alarm is triggered. Make sure your Mail Service Settings are correct.
Upload Image on Alarm – When you check the “Upload Image on Alarm”
box, you enable the function of having all images sent to your FTP le once
the alarm is armed. You can set the intervals (in seconds) at which images are
uploaded.
REC automatically and save to PC - When you enable motion detection and
open the camera monitoring page on your computer, if an alarm is triggered,
the camera will automatically start to record (REC) for several seconds and save
the images to your computer.
- Send images to the FTP server, according to the interval set for sending
images.
Alarm Scheduler – Using the scheduler, you decide when you want your
camera to alarm. You can set the alarm schedule according to days of the week,
hours in a day, and even by quarter hours. On the Scheduler, you can easily
click on the times you want the camera armed (the section selected will turn
blue to indicate your times). Click again to undo your schedule, and the eld will
return to its original gray (blank). If you do not use the scheduler, the camera
will alarm any time motion is detected.
Alarm Scheduler
Motion Detect Armed - When you enable Motion Detect Armed, the camera
can be triggered to send email alerts and record images. On the Device Status
indicator on the camera monitoring page, the green icon becomes red and an
alert will sound.
Motion Detect Sensitivity - You can choose up to 10 motion sensitivity
settings. The higher the number, the higher the level of sensitivity.
Send Mail on Alarm – When you check on the “Send Mail on Alarm” box, you
enable this function and an email with a picture will automatically be sent if an