Filter
Top Products
12 13
IP100 Manual
• Network Conguration – When you click on Network Conguration, a
box will open that allows you to congure you network settings. You can
congure the network as follows:
IP address: Fill in the assigned IP address, making sure it has the same
subnet as the gateway, the computer, and the router.
Subnet Mask: The default subnet mask of the equipment is:
255.255.255.0.
Gateway: Make sure it is in the same subnet as the computer’s IP
address.
The default Gateway address is 192.168.1.1.
DNS Server: The IP address of the Internet Service Provider (ISP).
This information can also found in the Network Connection Details
window(see Picture 15).
http Port: The default http port number is usually 80.
User: The default administrator user name is: admin.
Password: The password is: No password.
Obtain IP from DHCP server: If you click on (enable) “Obtain IP from
DHCP server” you will automatically be assigned a dynamic IP address
for your equipment if your gateway supports DHCP (most gateways
support DHCP). Make sure your router is connected and has the DHCP
function.
Note: If you receive a prompt that says, “Subnet does not match. Double-
click to change,” reset the camera’s IP address, subnet mask, gateway, and
DNS server numbers.
• Upgrade Firmware
To upgrade the system rmware and the Web UI, start by entering your
correct user name and password. (The user should have administrative
authority.)
• Refresh Camera List
Refresh camera list manually.
• Flush Arp Buffer
When the cable network and wireless network of the device are both a
xed IP address, you may encounter an error. In the event you can locate
the camera IP address but are unable to open the camera web page, try
using the ush arp buffer to open.
• About IP Camera Tool
This option lets you check the software versions of the IP Camera Tool and
the ActiveX control.
4.3 IP Camera Login
From the list of devices in the IP Camera Tool window, double-click the IP
address of your IP camera. Internet Explorer will automatically open and display
the camera login page. Or, you can access the camera by typing the camera’s