Filter
Top Products
Save Settings Feature
A Save Settings menu line item allows the user to save the EV and White Balance
settings. The original model camera would not save these settings changes when the
camera power was turned off.
Saving White Balance or EV settings
1 Turn on the power.
2 Move the mode dial to the Record position.
3 Push the Menu button on the back of the camera.
4 Scroll to the White Balance or EV selection and push the OK button.
5 Select a new setting and push the OK button.
6 Scroll to the Save Settings choice in the Record menu and push the OK button.
7 You will see an Are you sure? message.
• Selecting Yes will save the White Balance or EV settings when the camera is
turned off. This also saves White Balance and EV settings when the camera
batteries are removed.
• Selecting No will not save the new settings when the camera is turned off. No
will also restore White Balance and EV settings to default (White Balance = Auto,
EV = 0) when camera is turned off.
Flash works when White Balance setting is changed
Note: This is an undocumented feature. It is not mentioned in the literature or help
files included with the camera. In the previous camera model you were unable to use
the flash when a non-auto White Balance was selected. The updated camera allows
the flash to fire with any White Balance setting.
PDC 2300Z User Manual Addendum (page 2)