Filter
Top Products
CRF95
RF
Output Adapter
This adapter is used with coaxial RF cable
(AH065G
of
AH066G)
to connect your
camcorder to a standard TV (one without
audio/video input jacks) for playback. If
your antenna cable is the flat twin-lead type
attached by two screws, you will also need a
300-75 ohm transformer such as 193983. If
your TV, has 300 ohm VHS screw terminals,
you will need an optional
751300
ohm
transformer such as AH01 1.
Coaxial
RI!
Cables
AHO65G
(6-R)
AH066G
(104-t)
-
193983 Cable Transformer
These RF cables are used with the RF output
adapter to connect your camcorder to a standard
TV (one without audio/video input jacks) for
playback.
If your antenna cable is the flat twin-lead type
attached by two screws, you will also need a
300-75 ohm transformer such as 193983.
If your TV has 300 ohm VI-IS screw terminals, you
will need an optional 75-300 ohm transformer such
as
AHOll.
This 300-to-75 ohm transformer is used to connect a
standard 300-ohm antenna twin-lead to a standard round
75-ohm
connector.
AH011 Cable Transformer
This
75-to-300
ohm transformer is used to connect a
standard
75-ohm
antenna cable, such as
AH065G
or
AH066G,
to the 300-ohm screw terminals on a TV.
AH25 Y-Adapter
This Y-adapter allows you to connect your camcorder’s mono
audio cable to a stereo TV or VCR.
(continued on next page)