Filter
Top Products
Caution: Do not attempt to use
a+ower
converter” to
Use
your*AC adapter/charger
on a power source other than 120 volts, 50/60 Hz, or the adapter/charger and
camcorder may be da&aged. If you wish to operate the
AC
adapter/charger on a
power source other than 120 volts,
5OKO
Hz, use only a transformer-type power
converter.
Do not use %olid-state” or “switching-type” power converters. They
will damage your AC adapter/charger.
An’optional CPSOl4 shown on page 3 is
designed for use on 100-240 volts, 50/60 Hz.
“’
.b
:.
Using the Adapter/Charger to Power Your Camcorder
Plug in AC Outlet
Adapter/Charger --
PO
Indicator
DC/
OUTPUT
AdapterlChargel
-
_
n\r
r-..%.,a
‘DC
IN
9.6V
Jack
1. Connect one end of the adapter/
charger’s cable to the adapter/
charger’s DC OUTPUT jack and the
other end to the
DC
IN
9.6V
jack on
the back of the camcorder.
2. Plug the adapter/charger into the
nearest AC outlet
(12OV,
50/60
Hz).
3. The POWER indicator on the
adapter/charger will light when it is
properly connected.
Notes: The adapter/charger cannot charge
the battery and operate the camcorder at the
same time. If you connect both, the
adapter/charger will power the camcorder.
Remove the adapter/charger’s cable from
the
DC OUTPUT
jack to charge the
battery.
16
When using the adapter/charger to power
the camcorder, the battery level indicator
may display
i-~
. This indicator is used
for battery operation and has no meaning
when using the adapter/charger to power
the camcorder.
To Remove the Adapter/Charger
1. Remove the adapter/charger’s plug
from the AC outlet.
2. Remove the adapter/charger’s DC
cable from the DC
IN
9.6Vjack
on the
camcorder.