Filter
Top Products
Set the Time and Date
DATE/TIME
REW (Rewind)
POWER
F.FWD (Fast Forward)
I
S,TOPIEJECT
1. Attach a power supply (battery or
adapter/charger) to the camcorder.
2. Press and hold the small button on
POWER and place in
CAMERA.
3. Press DATE/TIME to display the date
and time in the viewfinder. A flashing
cursor lets you know which part of
the display you are setting.
Note:
If flashing cursor does not appear,
press and hold
DATE/TIME
and then press
STOPIEJECT.
i
r
,~2~OOAH
,l,(
l/94
4. Repeatedly press
F.FWD
or
REW
until
correct month appears. Press and hold
the button to advance the digits faster.
5. When the correct digit is displayed,
press
STOP/EJECT.
The cursor will
move to the next part of the display.
6. Repeat steps 4 and 5 to set the correct
month, day, year, hour, minute(s), and
AMIPM.
7. After setting
AM
or
PM,
press
DATEITIME
to remove the flashing
cursor and start the internal clock.
To Correct the Date or Time
To
correct the date or time, press and
hold
DATE/TIME
and then press
STOP/EJECT. The display will appear in
the viewfinder along with the flashing
cursor. Use F.FWD and REW to correct
the time or date. Press
DATE/TIME
to
remove the flashing cursor and start the
clock.
(continued on next page)
30