Filter
Top Products
/
POWER
(CAMERA/OFFIVC;
Switch and Indicator
(Located on side
of eyepiece.)
3. Remove the lens cap and attach
it to the handstrap.
4. Tbrn on the camcorder.
The position of the POWER
(CAMERA
JOFFIVCR)
switch tells
the camcorder whether you want to
record (CAMERA), play back tapes
(VCR), or turn off the power (OFF).
l Press and hold small button on
i
i
POWER while sliding it in
CAMERA. The POWER indicator
*
will light when the camcorder is
!
turned on.
!
I
5. Insert a cassette.
s...
l Press STOP/EJECT to open the
.xu
cassette compartment.
l
Insert the cassette with the safety tab
facing up and the tape windows
facing out.
12
’
Electronic Viewfinder
(Grasp Here to Move)
l
Press the cassette down gently until
it locks into place, and close the
cassette compartment door.
l
Details are on page 23.
6. Position viewfinder and adjust
eyepiece focus control.
l Grasp the viewfinder and rotate it
horizontally.
l Pull the viewfinder out from the
camcorder and rotate the eyepiece
into a comfortable viewing position.
Caution: Pulling on the eyepiece may
cause damage to the eyepiece or
camcorder.
l If the image in the viewfinder is
blurry, adjust the eyepiece focus
control for your vision. Details are
on page 26.