Filter
Top Products
@
Attach the wh te
plug
on one end of
b
0
2 Attach the yellow plug on the same
the
audiofvide,
cable to the AUDIO
end of the audio/video cable to the
IN jack on
the,W,or
VCR.
VIDEO IN jack on the TV or VCR.
0
3
IN jacks, attach the
Attach the yellow plug on the other
MONO.
If one of
end of the audio/video cable to the
yellow VIDEO jack and the white
plug to the white AUDIO jack on the
side of the camcorder.
0
4
Place the AV
OUTIIN
switch/to OUT.
i
_”
Tapes on a VCR
_J
1. A. Camcorder c
0
n&ted
directly to
TV monitor:
jTu$
on the TV and
tune it to its
videQ
input channel.
2. Press and hold t
e
$a11
button on the
camcorder’s PO
sliding it to VCR. Insert the cassette
you want to playback (or copy).
Note: The
camcorder can only play back
tapes recorded at the SP speed.
3. Press PLAY on the camcorder. To
copy what the camcorder is playing,
place a blank cassette in the VCR and
start the VCR recording. Adjust the
tracking on the camcorder if necessary.
Details are on page 51.
l During playback, use the playback
features
described on page 51.
4.
Press
STOPJEJECT
when you are
finished.
Watching What Ithe’Capcorder is Seeing or Recording on the TV ‘*Y-F-‘,
1. A. Camcorder c
4
nn&ted
directly to
TV: Turn on the
$V,
and tune it to
its video inpu
k
chpnnel.
B. Camcorder c
nne$ted
to VCR that
is already co
necfed
to TV: Turn
on VCR and
i
lack
it in the “line” or
“camera” mo
e.
(If
your VCR does
not have a
“ii
e”
br
“camer$‘.+..
mode, consul
the!
VCk
owner’?
manual.) Op
:
normally do t
rat{~
the ?‘V as you
set
the’ signal
coming from he
VCR.
2. Press and hold the small button on the
camcorder’s POWER switch while
sliding it to CAMERA. Insert the
cassette you want to record on.
Note:
When the camcorder is used as a
camera, turn the TV’s volume down to
prevent a high-pitched squeal caused by
feedback.
3. Press the camcorder’s
RECIPAUSE
butt&
to begin recording. You can
watch what the camcorder is seeing or
recording on the TV screen.
I
53
I’