Filter
Top Products
50
Playback
Still Playback Mode
Still playback pauses the tape,
freezing a single frame on the display.
Activating Still Playback:
1. Press the Play/Pause Button (
)
during playback to freeze the image.
2. To resume normal playback, press
the Play/Pause Button again.
• If still playback continues for
more than a few minutes, the
camcorder’s stop mode is
automatically engaged.
• After approximately five
minutes in stop mode, the power
turns off to conserve power.
• When the Play/Pause Button is
pressed, the image may not
freeze immediately. The
camcorder takes a moment to
stabilize the still image.
Shuttle Search
Allows high-speed searching in either
forward or reverse directions.
Activating Shuttle Search:
1. Press the Fast-Forward Button
(
) or the Reverse Button ( )
during playback.
2. To resume normal playback, press
the Play/Pause Button (
).
• During playback, press and hold
the Reverse (
) or Forward
(
) Button. The search
continues as long as the button
is held. Once released, normal
playback resumes.
• A slight mosaic effect appears
on screen during Shuttle Search.
This is normal.
Frame-By-Frame Playback
Allows frame-by-frame searching.
1.
Press the Play/Pause Button ( )
during playback to pause the image.
2. Rotate the MENU/BRIGHT dial
towards + for forward frame-by-
frame playback, or towards – for
reverse frame-by-frame playback.
•
To resume normal playback,
press the Play/Pause Button (
).
Basic Connections
This manual includes information for
some basic types of connections.
Displaying Camcorder Data on a
Connected TV or VCR
• Date/Time: set DATE/TIME to ON
or OFF in the DISPLAY menu.
• Time Code: set TIME CODE to
ON or OFF in the DISPLAY menu.
• Playback Sound Mode, Tape
Speed and Tape Running: set ON
SCREEN to LCD or SIMPLE in
the DISPLAY MENU.
Notes:
It is recommended to use the AC Adapter/
Charger as the power supply instead of
the battery pack to achieve uniform
playback.
Use the provided A/V Connection Cable,
making sure to connect the end with a
single plug to the camcorder.
Adjust the TV sound volume to its
minimum level to avoid a sudden burst of
sound when the camcorder is turned on.
If you have a TV or speakers that are not
specially shielded, do not place the
speakers next to the TV as interference
will occur in the camcorder playback
picture.