Filter
Top Products
67
Trouble Checks
Trouble Checks and Adjustments
• Remove the power supply (battery pack, etc.) and
wait a few minutes for the icon to clear. When it
does, reattach the power supply, turn on the
camcorder’s power, and resume recording.
If the indication remains after repeating the above
procedure two or three times, consult your nearest
camcorder service technician.
• To protect the battery, it is recommended to
charge it in places with a temperature of 50-95
degrees Fahrenheit (10°C to 35°C) (pages 13-14).
• Remove the lens cap.
• Adjust the brightness of the LCD monitor
(page 22).
•
If the LCD is rotated forward, make sure it is fully
rotated 180 degrees
.
• Turn the camcorder’s power off and on again.
An error indication
(E01 — E06)
appears on-screen.
The charger
indicator on the AC
Adapter/Charger
does not light.
No picture appears
on the LCD
monitor.
When the
camcorder is
connected via the
IEEE 1394
connector, the
camcorder does not
operate.