Filter
Top Products
65
Trouble Checks
Trouble Checks and Adjustments
• Select Picture Wipe or Dissolve before recording.
The effects are then automatically activated (pages
29-30).
• The camcorder automatically shuts off after five
minutes in Record-Standby mode. Make sure you
continue using the camcorder within five minutes
after pausing a tape (page 26).
• Disengage Slow Shutter mode (page 31) or set
WIDE MODE to OFF (page 36-37) before using
Picture Wipe effects.
• Set WIDE MODE to CINEMA or OFF
(pages 36-37).
• Do not use Video Echo during a fade-in or fade-
out (page 31).
• If you want the lighting to look more natural, set
GAIN UP to AGC or OFF (page 39).
• Do not try to use the Classic Film or Strobe
modes during a scene transition (page 31).
• Turn off Sepia or Monotone before setting White
Balance (page 31).
• Set DATE/TIME to ON (page 42).
• When the LCD monitor is turned to face forward,
(page 22) date and time do not appear.
• In the Menu screen, set ON SCREEN to LCD or
LCD/TV (page 41) and set TIME CODE to ON
(page 42).
• Adjust the brightness and angle of the LCD
monitor (page 22).
The Picture Wipe
and/or Dissolve
functions do not
work.
The Video Echo
mode does not work.
Even when Slow
Shutter is not
selected, the image
looks like it is.
There is no strobe
when the Classic
Film or Strobe mode
is activated.
White Balance
cannot be activated.
During recording,
the date/time does
not appear.
The indicators and
messages do not
appear.
Images on the LCD
monitor appear dark
or whitish.