Filter
Top Products
Powering Your Camcorder
Note: The battery level indicator has no meaning when
you power the camcorder with the optional car cord
adapter/charger.
22
DISPLAY
REC
EJECT
REW
PLAY
FF
PAUSE
STOP
FOCUS
ON/OFF
DATE
FADE
POWER
CAM OFF VCR
POWER
SAVE
ON
COUNTER
RESET
AUTO
BATT
MEMO
REC
START/
STOP
1. Remove battery if it is attached to the camcorder
or car cord adapter/charger.
2. Plug one end of the DC power cord into the DC
OUT jack on the car cord adapter/charger and the
other end into the DC IN 6.5V jack on the back of
the camcorder.
3. Insert the DCC05’s plug into the vehicle’s
cigarette lighter socket. The POWER indicator on
the DCC05 will light.
Optional Thomson DCC05 Car Cord Adapter/Charger
This adapter/charger allows you to power your camcorder from the cigarette lighter socket of a car,
truck, or RV. It converts 24- and 12-volts to a 6.5-volt output. It can also charge the battery that
came with your camcorder and the AV8MM (long play) battery.
Consult the instructions enclosed with the DCC05 for complete operation information.
Cautions: The DCC05 is designed to be used only
with vehicles having negative ground electrical
systems.
Do not use any other car cord with this camcorder.
Other car cords may damage your camcorder.
POWER
CHARGE
REFRESH
Using DCC05 Car Cord Adapter/Charger to Power the Camcorder
Using DCC05 Car Cord Adapter/Charger to Charge the Battery
1. Remove DC power cord if it is attached.
2. Attach the battery as shown.
3. Insert the DCC05’s plug into the cigarette
lighter socket. The POWER indicator on the
DCC05 should light.
DC Power Cord
DC IN 6.5V Jack
DC OUT Jack
Cigarette Lighter Socket
Cigarette Lighter Socket