Filter
Top Products
DISPLAY
REC
EJECT
REW
PLAY
FF
PAUSE
STOP
FOCUS
ON/OFF
DATE
FADE
POWER
CAM OFF VCR
POWER
SAVE
ON
COUNTER
RESET
AUTO
BATT
MEMO
REC
START/
STOP
33
Time Counter with Memory Stop
Time Counter
The time counter display shows the actual time elapsed when recording or playing back a tape. The time
counter quickly locates the end of recorded segments. Note the reading when you are finished recording or
playing back a tape. Before you start to record or playback a tape, press the COUNTER RESET button to set
the counter to “0:00:00”.
For example, you recorded a 10-minute segment. Later, you want to locate the end of your recording. Insert
the cassette and fast-forward the tape until the time counter reads “0:10:00”.
M 0:00:00
Time Counter
with Memory-
Stop Feature
Turned on
Seconds
Minutes
Hours
Tape Remaining Display
The tape remaining display tells you how much
recording time you have left on the tape.
1.Press and hold the small button on POWER while
you place it in CAM. Press the thumb trigger
(START/STOP on remote) to start recording.
2.Press COUNTER MEMO to change the time
counter to the tape remaining display. After a few
seconds the arrows appear to indicate the amount
of tape remaining on the cassette in the camcorder.
COUNTER RESET Button
COUNTER MEMO Button
REW (Rewind) Button
REW
(Rewind)
Button
START/STOP
Button
STOP Button
STOP Button
POWER Switch
Thumb Trigger
REC
REW PLAY F.FWD
STOP
F. ADV PAUSE SLOW
ZOOM
SCENE
SEARCH
COUNTER START
DISPLAY
RES MEM
STOP
COUNTER
RES Button
COUNTER MEM
Button
Memory-Stop Feature
The memory-stop feature helps you locate a certain
point on the tape during playback. When memory
stop is turned on, the tape will stop automatically
during rewind or fast forward when the time counter
reaches “M 0:00:00”.
1.Press and hold the small button on POWER while
you place it in VCR.
2.Press COUNTER MEMO (memory) to turn on
memory stop. An “M” appears in front of the
time counter.
3.Locate the place on the tape you want to return to
and press COUNTER RESET (COUNTER RES on
remote) to set the time counter to “M 0:00:00”.
4.Continue to play the tape. When you want to
return to the place you marked, press STOP.
5.Press REW (rewind). The tape will rewind to the
time counter reading of “M 0:00:00”.
Note: If you rewind the tape farther back than
“0:00:00”, a minus will appear in front of the counter.
E66666-F
Tape
Remaining
Display
3.After a few seconds the tape remaining display
will switch to the time counter again.
Notes: Once tape remaining has been calculated, it can
be displayed quickly by pressing COUNTER MEMO.
The tape remaining display only operates during
recording.
Ejecting the cassette or placing POWER in OFF or VCR
cancels tape remaining.