Filter
Top Products
DISPLAY
REC
EJECT
REW
PLAY
FF
PAUSE
STOP
FOCUS
ON/OFF
DATE
FADE
POWER
CAM OFF VCR
POWER
SAVE
ON
COUNTER
RESET
AUTO
BATT
MEMO
REC
START/
STOP
Viewfinder
25
The camcorder’s viewfinder is a miniature color LCD monitor that displays the picture seen by the
camcorder. The viewfinder can also be used for viewing the tape during playback.
Caution: Do not force the
viewfinder to rotate
completely around. This
will damage the viewfinder
and/or the camcorder.
Caution: When carrying the camcorder with the shoulder strap, rotate the viewfinder down. This helps
prevent possible damage to the viewfinder from bumping against your body as you move.
Eyepiece Focus Control
The eyepiece focus control lets you set the focus of
the viewfinder for your personal vision. If you wear
eyeglasses, you can probably operate the camcorder
without them.
The eyepiece focus control does not affect the focus
of the picture actually recorded by the camcorder.
1. Pull the viewfinder out into operating position.
2. Turn the eyepiece focus control until you clearly
focus on one of the viewfinder displays (such
as the time counter).
Tilt Adjustment
For convenient viewing, the viewfinder can be raised approximately 75°.
Viewfinder in Operating Position
(PULL here to extend viewfinder.)
Eyepiece Focus Control