Filter
Top Products
160
6
Settings
When you connect the camera to an AV device with an HDMI cable, select an
output resolution for playing back images. The default setting is [Auto].
1
Use the four-way controller (23) to select [HDMI Out] in the
[W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select an output format.
Select an HDMI output format to match the output format of an AV device.
4
Press the 4 button.
The setting is saved.
You can check the MAC Address, Password, and SSID of Wi-Fi mode.
1
Use the four-way controller (23) to select [Wi-Fi] in the
[W Setting] menu.
2
Press the four-way controller (5) or the 4 button.
The communication information is shown.
Selecting the HDMI Output Format
Viewing Communication Information of Wi-Fi
Mode