Filter
Top Products
31
1
Getting Started
Connect the supplied power adapter (D-PA135) to the camera and charge the
battery before using it for the first time or after a long period of non-use, or when
the [Battery depleted] message appears.
1
Make sure that the camera is turned off and open the terminal
cover.
Move the terminal cover lock lever in the direction shown by 1, slide the cover
in the direction shown by 2 and open the cover in the direction shown by 3.
2
Connect the USB cable to the power adapter.
3
Connect the USB cable to the camera.
Connect the terminal of the USB cable with the B mark facing the display side
of the camera.
4
Plug the power adapter into the power outlet.
The power lamp blinks while charging.
When charging is finished, the power lamp turns off.
The terminal cover will not close while charging. Leave the cover open when
charging and do not attempt to close it.
Charging the Battery
2
3
USB cable
Power adapter
4
To power outlet
Power lamp
While charging: Blinks
Charging finished: Turns off