Samsung SNP-5430H Security Camera User Manual


 
Face detection
You can set to detect recognized face and trigger an event accordingly.
1. From the Setup menu, select the
<
Event ( )
>
tab.
2. Click <Face detection>.
3.
Set whether or not to
<Enable>
.
4. Select <Sensitivity> tab to set the
sensitivity level.
`
As the sensitivity grows, face detection
becomes more close and detailed.
5. Select <Area> tab and drag on the
screen to define the desired detection
area.
`
You can specify up to 4 detection areas.
`
While drawing the area, you can cancel an
area by right-clicking.
6. To delete an area, right-click on the
area, and select delete [OK] on the
pop-up menus.
7. Specify the activation time and
activation condition.
`
For more information about <Activation
time> and <Action>, refer to “Alarm input”. (page 119)
8. When done, click [Apply (
)].
English _129
SETUP SCREEN