Samsung SNP-5430H Security Camera User Manual


 
Upgrade / Reboot
1. From the Setup menu, select the
<System ( )> tab.
2. Click <Upgrade / Reboot>.
3. Select a desired item and set it
appropriately.
Upgrade : Performs upgrading the
system.
Factory default : Resets the system
to the factory default.
- Except network parameter & Open
SDK : Initialize all except for the network setting and lens settings as well as the
open SDK installation files and internal settings.
- All : Resets all settings including the camera settings. (however, the log
information will not be reset)
`
The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is
found, the previous settings will be restored automatically.
Configuration backup & Restore : Backs up the current system settings before
performing the restoration process. The system is automatically restarts after
backup or restoration.
Restart : Restarts the system.
English _133
SETUP SCREEN